|
|
|
|---|
|
|
|
|
 |
 |
 |
 |
 |
Integrator Milltronics BW100
Weighing Electronics | Stand Alone Integrators
Milltronics BW100 integrator works with single or dual strain gauge load cell-based belt scales. With a speed sensor, it measures flow rate and totalized weight of bulk solids. It electronically balances the weigh bridge load cells to provide exceptional accuracy. The system is unaffected by uneven lateral loading so there is no need for load cell matching or mechanical balancing.
The large backlit display features a bar graph comparing current rate to full scale, reducing the possibility of human error.
The unit has a four-button control pad with tactile feedback keys used to set all parameters, or you can use Dolphin Plus software for programming and downloading through a PC or laptop.
Benefits
- Multi-field backlit LCD
- two remote totalizer contacts
- Auto zero function
- Load linearization
- Isolated mA output
- Programmable relay
Integrator Milltronics BW500
Weighing Electronics | Stand Alone Integrators
Milltronics BW500 operates with any belt scale with up to four strain gauge load cells. It processes belt load and speed signals for accurate flow rate and totalized weight of bulk solids. The BW500 can take on lower level control functions traditionally handled by other devices, and it supports popular industrial communication buses. Its patented load cell balance function eliminates matching of load cells.
The PID function may be used for rate control on shearing weighfeeders - where belt loading is constant - but can also control pre-feeding devices. Operating in tandem with two or more weighfeeders, the BW500 may be used for ratio blending and controlling additives. Batching, load out, and alarm functions are also provided by the BW500.
Dolphin Plus software may be used for programming the unit on a PC.
Benefits
- Automatic zero and electronic span calibration
- Alarms for rate, load, speed, or diagnostic error
- On-board Modbus®, optional PROFIBUS DP, Allen-Bradley® RIO and DeviceNet™
- Comprehensive weighfeeder control functions
- PID control and on-line calibration with optional analog I/O card
- Differential speed detection with second speed sensor
- Moisture meter input with optional analog I/O card for calculation of dry weight
- Inclinometer input with optional analog I/O card to compensate for conveyor slope
- Suitable for belt scale custody approval
- Measurement Canada and NTEP approved
Integrator Milltronics SF500
Weighing Electronics | Stand Alone Integrators
Milltronics SF500 operates with any solids flowmeter with up to two strain gauge load cells or LVDT sensor. The SF500 processes sensor signals for accurate flow rate and totalized weight of bulk solids. It can take on lower level control functions traditionally handled by other devices, and it supports popular industrial communication buses. Its patented load cell balance function eliminates matching of load cells.
The PID function may be used for rate control of pre-feeding devices and/or control of additives with two internal PID controllers. Operating in tandem with two or more solids flowmeters or weighfeeders, the SF500 may be used for ratio blending and controlling additives. Batching, load out, and alarm functions are also provided by the SF500.
Dolphin Plus software may be used for programming the unit with a PC.
Benefits
- Automatic zero and electronic span calibration
- Alarms for rate or diagnostic error
- On-board Modbus, optional PROFIBUS DP, Allen-Bradley RIO and DeviceNet™
- On-line calibration and dual PID control with optional analog I/O card
- Multi-point linearizer for high turn down accuracy
- Up to 8 multi-spans for application of more than one flow condition and/or material
- Moisture meter input with optional analog I/O card for calculation of dry weight
Dolphin Plus Software
Weighing Electronics | Stand Alone Integrators
Dolphin Plus is easy to install and use. Just load the software from the CD. In minutes, you’re ready to set up or modify complete parameter configurations for one or more devices.
Following configuration, you can alter parameters, upload and download parameter sets to and from disk, and use parameter sets saved from other instruments.
Benefits
- Real-time monitoring and adjustment of parameters
- On-screen visualization of process values
- Copying of data for programming several devices
- Fast setup and commissioning of device
- Generation of configuration reports within seconds
Smartlinx communication module
Weighing Electronics | Stand Alone Integrators
Many Siemens Milltronics products include Modbus® communications. For additional communication modules, SmartLinx cards are the answer.
They are fast and easy to install, and can be added at any time. The module simply plugs into the socket on any SmartLinxenabled product. They require no secondary private buses or gateways and no separate wiring. There are no extra boxes to connect to your network so there’s a minimum load on engineering and maintenance staff.
SmartLinx provides all data from the instrument, including measurement and status, and allows changes to operation parameters to be done over the bus. The user can select which data in the application layer to transfer over the bus. This selection saves bandwidth and memory and optimizes data throughput and speeds up the network, enabling you to connect more instruments to your network.
Benefits
- Fast, easy installation
- Direct connection: no additional installation required
- Scaleable application layer allows for optimized network bandwidth and memory requirements
- Modules available for PROFIBUS DP, Allen-Bradley® Remote I/O and DeviceNet™
