●Level switch for powders and/or granules (possible for liquids)
●Less effect by build-up
●Possible to use for low conductivity materials
●Instrument of a high sensitivity and stability
●Semi-permanent since it has no moving parts
●Easy to install and adjust
●On-site check is possible
●Possible to set up for time delay of relay contact output
●Liquid (solvent,acid.)
●Mixed liquid (waste water from plants..)
●Interface (crude oil and water..)
●Foam layer(latex foam..)
●Viscous matrial(clay,slugge..)
●Powder(plastic powder,carbon...)
●Granule(plastic pellet..)
●Lump(coa
Power Supply : AC 11/220V ±10%,60Hz
Output Contact : 1 SPDT
Response Time : 5 ms
Time Delay : 0-10 sec. free setting
Display of Operation : red LED
Operating Temp : -20~+60 degree C
Operating Pressure : STD. 10kgf/cm²
Mounting Regulation : 1
Cable Gland : 2-1/2
Length of Probe : 300 mm
Type : Compact
