|
APPLICATION NOTES
Use a low-cost single loop
4-20mA isolator to create a second loop.
Products referenced:
JH4300C,
JH4305,
JH5040,
JH5050
Marrying a field-upgrade 4/20mA
sensor to an old, nonstandard voltage-input “legacy”
system.
Products referenced:
JH4300,
JH5000
“Loop Powered Output” (current
sinking) option allows a powered transmitter’s
output to look like a 2-wire transmitter.
Products referenced: Most JH
Technology AC- or DC-powered transmitters.
Using intrinsic safety barriers
to provide safe manual control (potentiometer) in a
potentially-explosive area.
Products referenced:
JH4003I,
JH5800
A conveniently-located 4-20mA
isolator put the zero and span adjustments within
easy reach.
Products referenced:
JH4300C,
JH4305
In an oscillating system, an AC
input transmitter converts instantaneous position
measurement to a DC signal representing peak-to-peak
amplitude.
Products referenced:
JH5600,
JH6010I
Putting the cold-junction
sensor in the connection terminal virtually
eliminates compensation errors.
Products referenced: All JH
Technology thermocouple transmitters and alarms
When properly set up, one relay
announces overtemperature while the other warns of
thermocouple failure.
Product referenced:
JH1220
Subtract two voltage signals
using a low-cost isolator.
Products referenced:
JH4300,
JH5000,
FT/FDT5000
Expanded-scale potentiometer transmitter
converts throttle position to control voltage in a
ship upgrade.
Product referenced:
JH4003I
A small system of JH
Technology modules converts volume flow rate from
a turbine meter to mass flow, compensated for
pressure and temperature variations.
Products referenced:
JH7580,
JH4300,
JH9046 and two
specials.
|